Wednesday, June 11, 2014

My DIY CNC


I'm working on a new design for a homebrew CNC mill.  At roughly a 2x3 feet cutting area, I'll be able to use this to produce larger parts than I've been able with my 3D printers and smaller CNC machines.




I came up with a low-cost, DIY solution for anti-backlash nuts.  These, along with a lead screw, transfer the stepper motor's radial motion to linear motion for each axis - and are typically pretty expensive and hard to source with custom dimensions/specifications.  The ones I came up with, pictures above, total about $3.00 each, and are solely made up of components sourced from my local True Value hardware store!

I'm waiting to finalize the mill design until some of the pre-fabbed components arrive in the mail.  I'll then do some mock-ups and double-check measurements to make sure cutting parts and the final assembly will go smoothly.

I'll post more updates in July, when I return from overseas!

7 comments:

  1. Machine Tools Emart is No.1 Online store in India.You can purchase your products through online and you can upload your own products and you can sell your products through online.
    Power Press Machines in India | Heat Treatment Machines in India

    ReplyDelete
  2. Great, This project inspires me to make my own machine. I would like to build my own cnc mills machine but I find it difficult to understand everything about it, I just want to build a machine that can mill 1 inch thick plywood.

    ReplyDelete
  3. Amazing, I am glad i came across this blog. will visit often from now on.
    Cnc machines tools

    ReplyDelete
  4. Thanks for all your efforts that you have put in this. very interesting info . cnc machining

    ReplyDelete
  5. Thank you so much for sharing. Your content was very helpful. You are a marvelous writer. Good work! Aluminum Nitride (AlN) CNC Machining Services provided by Valley Design.

    ReplyDelete
  6. Good but this is small machine. we offers CNC Machining Service. Visit website to get more details.

    ReplyDelete